Categories
PriceSpy UK
Impartial price comparison

Kekeshop DC 5V-12V 120W ZVS Induction Heating Board Driver Module with For Tesla Coil

  • Danh mục: Daily Deals
  • Đã bán : 0
  • Kho : 6

So sánh giá (30)

Hình ảnh
Sản phẩm
Kho
Giá
Bảng Mạch Điều Khiển Cho Máy Tạo Độ Ẩm 5v
₫ 32.000
5V-12V Dc Brushless Motor Driver Board Controller For Hard Drive Motor 1.8A
₫ 75.440
Mô Đun Kiểm Tra Động Cơ Bước Dc 5v + Mạch Uln2003 Cho Arduino Kitchenool01
₫ 27.188
Bảng Mạch Cảm Biến Mini Zvs 120w
₫ 111.358
Mạch Nung Cao Tần ZVS 12V 120W
₫ 90.000
Mô-đun cung cấp năng lượng sưởi ấm cảm ứng điện áp thấp ZVS chuyên nghiệp 5V-12V 120W
₫ 111.000
Mô Đun Khuếch Đại Âm Thanh Mini Lm386 Dc 5v-12v Chất Lượng Cao
₫ 12.500
Mạch Nung Cao Tần ZVS Mini 120W 5V-12V DC
₫ 94.000
5V-12V DC Brushless Driver Board Controller For Hard Drive Motor 3/4 Wire
₫ 165.000
Mạch ZVS 12V 120W
₫ 90.000
Máy Sưởi Mini Cảm Ứng Nhiệt 120w Tesla Zvs
₫ 204.700
[utarabe.vn] DC-DC 12V to 24V Car Power Converter Boost Module with 120W Output Power Adapter
₫ 213.800
[Tp.HCM] Mạch Nung Cao Tần ZVS Mini 120W 5V-12VDC
₫ 135.000
FQE DC 12v ULN2003 stepper motor driver board step motor module for arduino FPO
₫ 11.000
Mạch Nung Cao Tần ZVS Mini 120W 5V-12VDC
₫ 125.000
5V-12V DC Brushless Driver Board Controller For Hard Drive Motor 3/4 Wire
₫ 84.000
DC 5V 12V ZVS Low Voltage Induction Heating Power Supply Module Induction Heating Board Tesla Jacob's Ladder Heating Coil 120W
₫ 100.959
Thiết Bị Cung Cấp Điện 5v-12v Zvs Chuyên Dụng
₫ 112.000
Máy Sưởi Mini Cảm Ứng Nhiệt 120w Tesla Zvs
₫ 193.400
DC 5V/12V Mini DPDT Relay Module Polarity Reversal Switch Board for Arduino UNO【COD / Low-cost Wholesale】
₫ 40.255
Mạch Nung Cao Tần Zvs Mini 120w 5v-12vdc
₫ 129.000
Bảng mạch sưởi ấm cảm biến Mini 120W DC 5V~12V
₫ 109.000
Mô Đun Sưởi Ấm Cảm Ứng Zvs 120w Cho Tesla
₫ 255.800
Mạch Nung Cao Tần ZVS Mini 120W 5V-12VDC
₫ 135.000
Mạch nung cao tần ZVS 120W 5 - 12V DC - 1B4
₫ 99.000
Bảng mạch sưởi ấm RR 120W DC 5V~12V Mini ZVS
₫ 117.900
Bo mạch sưởi cảm ứng Mini ZVS DC 5-12V 120W Flyback Driver Heater Ignition Coil
₫ 88.200
Mô Đun Sưởi Ấm Dc 5v-12v 120w Chuyên Dụng
₫ 241.700
Máy Sưởi Mini Cảm Ứng Zvs 120w Tesla
₫ 265.900
Mạch Nung Cao Tần Zvs Mini 120w 5v-12vdc
₫ 129.000

The best price for Kekeshop DC 5V-12V 120W ZVS Induction Heating Board Driver Module with For Tesla Coil right now is ₫ 99.000.


Feature:
1. The mini ZVS finished board has no taps, no heating coil, ignition coil, cooling fan, etc.
2. The maximum power is 120W (12V induction heating).
3. Push the ignition coil to 12V, when the primary 5 + 5 turns, it is about 30W.
4. Mini version ZVS no tap finished product induction heating for Tesla stepladder drive without cooling fan.
5. This heating plate requires a certain amount of hands-on ability and related knowledge.

Specification:
Item Type: ZVS Induction Heating Module
Model: BYS459-1500
Voltage: 5V-12V
Maximum Power: 120W

Package List:
 1 x ZVS Induction Heating Module 
 1 x For Tesla Coil 

Note:
1. Mini version ZVS no tap finished product induction heating for Tesla stepladder drive without cooling fan
2. This heating plate requires a certain amount of hands-on ability and related knowledge.
3. The maximum power of 120W (12V induction heating). Push the high voltage package 12V, when the primary 10 turns, about 30W.
4. The input voltage DC 5V ~ 12V, this voltage range is the voltage at work, not the voltage when the power supply is empty!
5. Confirm that all components are soldered correctly, the positive and negative poles of the power cord are not reversed, after the load is connected (heating coil, high voltage package), and then power on! No load can be powered! No-load power is easily damaged!
6PCS heating coil
The width of the heated object should be between 1/3 and 1/2 of the inner diameter of the heating coil, and the maximum should not exceed 2/3!
The diameter of the heated object should be controlled within 20mm as much as possible. If the heating is too large, it will be difficult to heat up to red. After all, the power is limited.
Inductive heating, usually work for 5 minutes to power off cooling. Because the current is relatively large during induction heating, the coil heat is also relatively large. When heated, part of the heat generated by the heated object is transmitted to the heating coil. For a long time, the temperature of the heating coil is high. If the heating coil is connected to the terminal, the plastic part of the terminal will melt! Therefore, it is best to solder the heating coil directly to the PCB during induction heating. Please pay attention to this point.
Long-term use is recommended to use copper tubes for coils and water cool